| Category: | 3D Printing Accessories |
| Item: | Tolerance & Clearance Testing Board |
| Description: | If you’re designing for 3D Printing or you have a new printer, this tolerance tester will not only give you examples of the tolerances of your printer, but allow you to get a feel for how tight or loose you want to design your clearances for various purposes. |
| Size: | 5 x 1 | Gridfinity Grid Depth: 83.51 mm Width: 83.51 mm Height: 57.15 mm |
| STL File: | THINGIVERSE |
| Editable Design File: | TINKERCAD |
Additional Details: An 8mm Plunger is Printed and holes 8.0 – 12.0mm are relieved in a 2×1 Gridfinity Block. You can put the plunger in each of the holes to see how tightly your printer prints the actual dimensions as well as get a feel for the various clearances.
Clearances:
0 – 1mm (0.1mm Increments)
1 – 4mm (0.5mm Increments)
If you want to get the feel for an unprinted object as well, this was designed for an 8mm rod–I used a Craftsman 1/4″ Socket Drive Extension (CMT43539) which measured to 8mm on calipers for the main rod section.
Shopping List
Fellow Explorers! Some links on this page are affiliate links which means that, if you choose to make a purchase, I may earn a small commission at no extra cost to you. I greatly appreciate your support in exploring The Modern Frontier!
