| Category: | Gridfinity Organization System |
| Item: | Torx Driver Trays |
| Description: | Magnetic custom trays designed to hold your torx drivers. Customizable labels and sizing with free, editable design files. |
| Size: | 5 x 1 | Gridfinity Grid Depth: 209.55 mm Width: 41.51 mm Height: 25 mm |
| STL File: | THINGIVERSE |
| Editable Design File: | TINKERCAD |
Additional Details: The driver trays provided will likely work for most drivers out there, you can simply select the best fitting tray according to length/placement of the rest/magnetic clasp. Then change the labeling of the T-size as needed before printing.
Additional Customization Instructions:
- If overall driver length exceeds the 1×5 Gridfinity frame size, use the open ended tray. If the driver fits within the frame, use the closed tray. (This isn’t essential but is a little reminder when organizing trays on frames to leave extra space on the end)
- Measure distance from handle to closest edge of driver rod [ (Diameter of widest part of handle – Diameter of driver rod) / 2 ], this should be the height of the magnetic clasp/rest to promote an even sit on the tray and adherence of both magnet surfaces to the driver rod. The clasp has a depth of 2mm for the 6x2mm magnets, so just subtract 2mm from your measurement and adjust the box on which the clasp sits to x – 2mm.
- Adjust the lengthwise placement of the clasp/rest according to handle and overall driver length.
Shopping List
Fellow Explorers! Some links on this page are affiliate links which means that, if you choose to make a purchase, I may earn a small commission at no extra cost to you. I greatly appreciate your support in exploring The Modern Frontier!
